TECHNOLOGY	TECHNOLOGY  APPLICATION EXHIBITION LUBRICATION
SROLLING BEARINGS-CHAMFER DIMENSION-MAXIMAL VALUES SROLLING BEARING-RADIAL INTERNAL CLEARANCE SSPECIFICATIONS OF VIBRATION (ACCELERATION ) SFLANGED TYPE OUTSIDE RING TOLERANCE SINSIDE RING TOLERANCETHE Sbasic information STOLERANCE OF FLANGED OUTSIDE DIAMETER SSPECIFICATIONS OF VIBRATION (VELOCITY)

FLANGED TYPE OUTSIDE RING TOLERANCE    Summarize from GB/T 307.11994 Rolling bearings Radial bearings Tolerance equivalent ISO 492:1994 Rolling bearings Radial bearings Tolerance.

D mm Dmp VDp(4) P0 P6 P5 P0 P6 P5 P0 P6 P5 Open Type Capped Type Open Type Capped Type Open Type Diametric Series Diametric Series Diametric Series 9 0 1 2 3 9 0 1 2 3 0,1 2,3 9 0,1 2,3 Upper Limit Lower Limit Lower Limit Lower Limit Max. Max. Max.  2.5(1) 6 0 -8 -7 -5 10 8 6 9 7 5 9 5 4 6 18 0 -8 -7 -5 10 8 6 9 7 5 9 5 4 18 30 0 -9 -8 -6 12 9 7 10 8 6 10 6 5  30 50 0 -11 -9 -7 14 11 8 11 9 7 13 7 5 50 80 0 -13 -11 -9 16 13 10 14 11 8 16 9 7 VDmp Kea SD SD1 Seaɢ Sea1 VCs VC1s P0 P6 P5 P0 P6 P5 P5 P5 P5 P5 Max. Max. Max. Max. Max. Max. 6 5 3 15 8 5 8 8 11 5 6 5 3 15 8 5 8 8 11 5 7 6 3 15 9 6 8 8 11 5 8 7 4 20 10 7 8 8 11 5 10 8 5 25 13 8 8 10 14 6 noteIncluding 2.5      un- regular data in 7 and 8 of diametric series.      P0 un- regular data in 9, 0 and 1 of diametric series; P6 without regular data in 9 of diametric series; P5 without regular data in capped type bearing.      Suit for pre-installation or after knockdown of inside and outside stop-moving ring.      Not suit for the bearing of flanged outside ring.      Only suit for deep groove ball bearing.

INSIDE RING TOLERANCE   Summarize from GB/T 307.1-1994 Rolling bearings - Radial bearings - Tolerance equivalent ISO 492:1994 Rolling bearings - Radial bearings - Tolerance. d mm Dmp VDp VDmp P0 P6 P5 P0 P6 P5 P0 P6 P5 P0 P6 P5 Diametric Series Diametric Series Diametric Series 9 0 1 2 3 9 0 1 2 3 9 0,1 2,3     Upper Limit Lower Limit Lower Limit Lower Limit Max. Max. Max. Max. 0.6     2.5 0 -8 -7 -5 10 8 6 9 7 5 5 4 6 5 3 2.5     10 0 -8 -7 -5 10 8 6 9 7 5 5 4 6 5 3 10     18 0 -8 -7 -5 10 8 6 9 7 5 5 4 6 5 3 18      30 0 -10 -8 -6 13 10 8 10 8 6 6 5 8 6 3 Kia Bs VBs Sd Sia P0 P6 P5 Cs(C1s) VCs(VC1s) P5 P5 P5   P0 P6 P5 P0 P6 Max. ϲ ² ² Max. Max. Max. 10 5 4 0 -40 -40 12 5 7 7 10 6 4 0 -120 -40 15 5 7 7 10 7 4 0 -120 -80 20 5 7 7 13 8 4 0 -120 -120 20 5 8 8 noteIncluding 0.6.      un-regular data in 7 and 8 of diametric series.      only suit for deep groove ball bearing.

THE TOLERANCE OF FLANGED OUTSIDE DIAMETER    Summarize from GB/T 307.1-1994 Rolling bearings - Radial bearings - Tolerance equivalent ISO 492:1994 Rolling bearings - Radial bearings - Tolerance. D1 mm D1s Oriented Flanged Unoriented Flanged UpperLimit LowerLimit UpperLimit LowerLimit - 10 0 -36 +220 -36 10 18 0 -43 +270 -43 18 30 0 -52 +330 -52 30 50 0 -62 +390 -62 50 80 0 -72 +460 -74