bearing,Уhongs,ʩ
HOME
COLLECTION
CONTACT US
CHINESE
  Introduction | Stock | Product Information | Catalogue | Contact Us | Online Order | Product Show|  
  introduce
METRIC MR BEARING TYPE
METRIC SUPER THIN TYPE
NEEDLE BEARING TYPE
FISHING GEAR BEARING TYPE
ELECTRICITY BEARING TYPE
OTHER BEARING TYPE
          TECHNOLOGY
APPLICATION
EXHIBITION
          Search
 
 
 
TECHNOLOGY TECHNOLOGY  APPLICATION EXHIBITION LUBRICATION
 
Roller Chrome SteelGCr15GB/T182542000 High - carbon chromium bearing steel
<Form 3> Brand Name and Chemical Component
Unionize
Figure
Code		 Brand Nam Chemical Component %
C Si Mn Cr Mo P S Ni Cu Ni+Cu O(10-6)
B00150 GCr15 0.95
~1.05		 0.15
~0.35		 0.25
~0.45		 1.40
~1.65
0.10		 0.025 0.025 0.30 0.25 0.50 15
NOTE:1.Content of copper which be remained after the chrome steel tube used should not exceed 0.2%.(smelting analyse)
     2.Content of oxygen will be tested out in Billet and steels.
     3.Content of sulfur which be caused after striped steel used should not exceed 0.02%.(smelting analyse)
 
<Form 4> Windage of Finished Products is Allowed on Chemical Component
Element C Si Mn Cr P S Ni Cu Mo
Allowed Windage 0.03 0.02 0.03 0.05 +0.005 +0.005 +0.03 +0.02 0.10ʱ+0.01
0.10ʱ0.02
5.2 Smelt Way
The Steel should be Deled under the condition of Vacuum.
 
Austenite Stainless Steel1Cr18Ni9GB 122092 Stainless Steel Stick
<Form 2> Chemical Component of Steel
Num-ber Brand Code Chemical Element%
C Si Mn P
S Ni Cr Mo Cu N other
5 1Cr18Ni9 0.15 1.00 2.00 0.035 0.030 8.00~10.00 17.00~19.00 - - - -
 
Martensite Stainless Steel9Cr18GB 308682 High Carbon Chromium Stainless Steel Technical Condition
<Form 4>
Brand Code Chemical Element%
C Si Mn P
S Cr Mo
Not Exceed to
9Cr18 0.90~1.00 0.80 0.80 0.035 0.030 17.00~19.00 -
<Form 5>
Chemical Element Cr Mo
The Permitted Tolerance% 0.15 0.03
<Form 6 >Remainder Element
Chemical Element Ni Cu Ni+Cu
The Permitted content < % 0.30 0.25 0.50
 
Manufacturer Brand name Basic type grease Operation temp.c Use
Exxon   Beacon 325  synthetic grease   -55~120 General purpose grease
Exxon   Andok B(Mil-G-18709A) Channeling petroleum grease -30~95  Excellent high speed,low torque,light mass
Exxon  Andok C    Channeling petroleum grease -30~120 Smooth running,long life
   G.E.Versilube G300   Silicone gorase -75~205 Lighe loads and fine moderate speed
Mobil28  (Mil-G-81332) Synthetic hydrocarbon -55~180 Wide temperature range,good low temperature torque
Chevron   Mineral grease -30~180 High temperature range with good water resistance
Shell  Alvania2 Mineral grease -35~120 Long life and wide application
DuPont  Krytox 240AC(mil-G-27617) Fluorinated grease -35~290 High temperature stablility with good lubricity properties
Shell  Dolium R Petroleum grease -40~150 Good corrosion resistance and water resistance
KYODO SRL Synthetic grease -40~150 Low noise,low torque and special case
NIG-ACE W Synthetic grease -18~150 Low noise,low torque and special case
Mobil HP Lithium complex -30~110  Vibration,moderate speeds and good corrosion resistance
Tianjin Hangu Motor No.2 Mineral grease -30~110 wide application,general purpose
ADD:13# Taijiang Industrial Estate Juyuanzhou, Jinshan Development District,Fuzhou,China   P.C.:350002
Tel: 86-591-837471038 lines   Fax:86-591-83747903   E-mail: info@hongsbearing.com